Wednesday, October 14, 2020
Monday, October 12, 2020
They are perfect. A little rough but this is what they look like fresh out of the molds.
Tomorrow I will clean them up, then rough them up with steel wool to bring out the highlights and then work on the patina, or color to finish them off.A good days work. Now to clean up the mess.
These are the first pours of the first castings. I don't usually do three at once, in case there is a problem with the chemicals or temperature I would loose three instead of one. But the chemicals are new and it is morning so I am confident. I did this once before pouring multiple molds at once some some chemicals that were previously opened, and I lost all three castings. The castings never hardened. After two years, I can still bend and twist them.
The resin I am using is Easy-Flo Clear, equal parts of A & B. I mix a brown dye to part B, stir, add 1lb. of Bronze powder, stir until mixed together, add A to it, stir for 30 secs., I then have max two minutes to paint on the first coat and pour in and slush around the balance of the solution before it sets up. I then mix another batch and fill up the balance of the mold.
mold takes 32oz of resin and 2 lbs. of bronze powder. Then I wait for
about 30 mins before I can demold and see if the casting is good. I want
to make sure every minute detail is in the final.
Friday, October 9, 2020
These are the product of the final tests to check the molds.
I have only poured the areas of the molds where I have a concern and to make sure the details are all there.
They do look a bit like ghosts, only partially there and whispy.
After they hardened and I checked them over, it is time to clean up the molds and make sure they are super clean with no clay or resin residue in the folds and cracks. That will take the rest of the day.I will make the first casts on Monday. Happy weekend.